Sometimes it may get a little troublesome for you to change the toner in the brother printer if you have never done it before. The process may differ slightly depending upon which model or consumable you are using but the main steps remain the same with every model of brother printer. But if you know about the processes of the toner cartridge and drum units it will be much more convenient for you.
In this article, you are going to get a little knowledge about Brother Printers, how the toner cartridge and drum units work, and finally how to change toner in brother printer.
In 1908, an organization was founded named Yasui Sewing Machine Co in Japan. After going through different phases at different times finally in 1962, the corporate was officially named Brother Industries, Ltd. This group entered the printer market during its long partnership with Centronics and it also excelled in this field. At this time, Brother Printers are considered to be among the best printers in the world.
How To Change Toner in Brother Printer?
This was an introduction to Brother Industries, now let’s move into the complete how-to guide of changing the toner in the printer.
Understanding Toner Cartridge and Drum Unit
The toner cartridge and the drum unit work together to make an impression on the paper. The toner cartridge contains the toner powder in it and the drum unit is an electrically charged cylinder that takes the toner powder from the cartridge and transfers it to paper to create the print. Brother sells both the products as two different consumables. The cartridge is designed to be fitted in the drum and both are installed as a single unit.
Toner is available in three different types. Standard yield, high yield, and very high yield. The latter two are a little bit costly than the former one but also produce more prints. The drum unit can only be purchased in one size and can fit all three toners in it.
Read our Review: Best Printers For Digital Photography
When should I replace toner?
Brother keeps a track of the life of the toner and when the time comes to change the toner, a message appears on the screen saying “Toner Life End / Replace Toner” on brother printer.
Changing Toner Cartridge in Brother Printer
Brother printers have Toner Cartridge and Drum Unit as separate consumables as mentioned earlier, make sure that you only replace the toner cartridge, not the drum unit. To change the toner cartridge in the brother printer, follow the given steps.
- Turn on the machine.
- Open the front cover.
- Unassembled the toner cartridge and the drum unit from the printer.
- In the assembly (toner cartridge + drum unit), you will see a green lock. Push down the lock lever and take Toner Cartridge out of the Drum Unit.
- Unpack your new toner cartridge.
- Dismantle the protective cover.
- Place the new toner cartridge in the Drum Unit firmly, until you hear it being locked in its place.
- There is a green tab in the assembly on which you can see an arrow-like shape. Gently slide it from left to right and vice versa a few times to clean the corona wire.
(Warning: After sliding the tab, make sure that it has returned to the right place i.e., the arrow on the tab must coincide with the arrow on the assembly.)
- Install the drum unit and toner cartridge assembly back into your printer.
- Close the front cover of the machine.
Important note: After changing the toner in the brother printer DO NOT turn off the printer or open the front cover UNTIL the display on the screen returns to NORMAL MODE.
No need to worry now if your Brother Printer is showing you an error saying, “Toner Life End / Replace Toner” because after reading this article you know how to change toner in brother printer and now you can do it just by yourself.
But before changing the toner, you must remember the important points mentioned above. If you keep these points in your mind to maintain the life of your machine, after all, you have got one of the best printers around the globe. So, it’s your duty to keep it safe.