Printing these days is easier than it ever was. Back in the day, there were different complicated methods to print on various surfaces. Moreover, printing on fabric was one of the hardest tasks. However, now you can simply print on fabric with a laser printer. Stick to the article to learn some of the best ways to print on fabric with a laser printer.
What’s Your Fabric?
It heavily depends on the type of fabric that you are using. This plays an important role therefore it’s important to either pick or create a fabric that is compatible with printing with a laser printer.
Commercially Prepared Fabrics
This is the best and simplest way for printing with a laser printer. These fabrics are already adjusted and you can purchase them either as rolls or sheets. This variation differs in terms of size. Although, these fabrics do well while you apply the printing procedure.
The usual clothes can be a real trouble and they will end up getting shredded. The machines for commercial printing do enough pressing that can shred normal or usual fabric while printing. Moreover, they can get off while peeling the back off.
This is where the commercial fabrics come in. although, commercially prepared fabrics are more expensive than normal fabrics that are created to print-at-home.
Sometimes it becomes hectic to print on them as they are prepared for commercial machines. However, they are still pretty good with an inkjet printer.
Also, it is hard to find a different variety of colors as most of the commercially prepared fabric is available in white color only. As large firms acquire designs instead of colorful bases these days.
Subsequently, there is another way to get commercial fabrics at a low price.
Create Your Own Printable Fabric
As I said, the commercially prepared fabrics are as good as they are expensive. Also, you will not be able to find a good variety of colors in these fabrics. They are mostly manufactured in white color. Therefore, you can create your own fabric at home. This gives you an upper hand as you don’t have to pay extra and you can create according to your need.
The best way to make the printable fabric is to consider freezer paper for use. Freezer papers are one of the best options when you are going for laser or inkjet printers.
While printing on a fabric you have to make sure that there is no residue left after peeling off the back. Freezer paper’s shiny side is the best option there. It sticks perfectly to the fabric and you can peel it off easily as well.
Quick Guide To Pre-Treat Your Fabric
Pre-treating your fabric will let you apply the freezer paper efficiently. Moreover, it will help to peel off the back of the freezer paper without errors and residues. There are a lot of options for pre-treating fabrics. You can browse and find various products that are used as pre-treating fixatives.
It also depends upon the printer you are using. Not just the type, but the model as well. You can find online the fixatives that suit your printer.
The other big hand that a fixative provides is to make your prints last longer. Furthermore, if your print is a picture, you might need a strong fixative as pictures have high chances to fade away. You can check Krylon to find some of the best pre-treating products.
Read Also: How to fax from Brother Printer?
Quick Guide About Printing On Fabric With Laser Printer
- First of all, make sure to get pure white cotton for your first try. The other thicker fabrics may end up shredding.
- There are a lot of pre-treating products for your fabric that helps to print easily. You can apply those products and let them dry before you start the printing process
- Considering the standard size of your fabric. Cut the fabric paper a half-inch extra to create a peeling side.
- If you are considering pre-treat your fabric, make sure not to apply any steam or iron-pressing. Simply remove any lose-thread and you will be good to go. Make sure that your pretreat fabric is a little bit larger than your freezer paper
- Place the shiny side of the freezer paper on your fabric and press it with a bit-warm iron. Make sure to not include any steam.
- The next part is the cutting part. You need to cut the freezer paper and treated fabrics by 8 and a half inches wide and almost 11-inch length. This is a standard size that goes well with laser printers.
- For the best cutting results, you can use rotary cutting equipment. You can get these at any hardware or stationery store. They are flexible to cut over the fabric without any error.
- Once you prepare it, insert the fabric manually into the printer feeder. You can check your printer’s manual to see whether it has to face up or down.
- A lot of people complain about the quality of printing with laser printers. It gets pixelated and distorted in some results. That depends upon the resolution you are choosing for your photo and the printer as well.
- Choosing high-resolution photos can give you a perk. If you are downloading from the internet you have to do a deep digging because mostly downloading a photo from the internet is low on quality.
- It is important to let the ink dry before you peel off the back of the freezer paper. Now remove the freezer paper carefully.
- If you used any commercial product to pre-treat your fabric, rinse the fabric with a commercially prepared fixative. It can save you from errors and make the print last longer. A lot of people use self-prepared mixtures and solutions such as vinegar solution to rinse the fabric but it can be a bad decision sometimes.
Check also: 5 best printers for zines
Quick Guide For Applying Freezer Paper On Fabric
If you are printing on a fiber with a laser printer, you might not need any fixative for pre-treating your fabric. Moreover, you need to be careful while applying the freezer paper. It might shred the fabric if there is any loose thread. However, it is suggested to remove all the loose threads beforehand. Follow the steps below to enhance your result even more.
- Apply the freezer paper on the wrong side of your fabric carefully.
- Once you apply it, place butter paper or a newspaper on top of it and leave it to dry.
- You can apply an extra coat of any fixative or other product. It might increase the chances of an everlasting print or at least increase the life span.
The Bottom Line
Printing on a fabric with a laser printer can be a pretty tough job. But it can be easy if you choose the right equipment. Also, use the right method and timing to enhance your result. You can use commercially prepared fabrics to get prints even better. Moreover, you can create fabrics yourself. Just make sure to use cotton fabrics as they are perfect to get in laser printers. Finally, apply the freezer paper and another fixative on the wrong side of the fabric and let it dry. Once it is ready, peel off the back carefully and rinse the fabric with a fixative to get the pre-treating products off.